- Enhanced image quality – 2nd generation
- Fantastic Full 3D 1080p image quality made ultra-smooth with PureMotion
- Total control – Advanced Colour Management System CMS+
- Easy Installation – Lens shift & shorter throw ratio
The HD92 incorporates our second generation LED light source. The new LEDs further improve the image performance with consistent, breath-taking, perfectly balanced colours from the first time, every time and for years to come. Whether you just fancy a relaxed movie night or immersing yourself in adrenaline-pumping 3D, the HD92 is the perfect choice for recreating the big-screen experience.
Superior LED Technology
Powered by 3 x LED’s, the HD93 delivers enhanced image quality with a wide colour gamut, superior colour saturation and outstanding brightness using separate Red, Blue and Green LEDs to produce intense yet accurate colours. Advanced switching of these LED’s provides increased image stability that rivals the performance of 3 chip DLP projectors.
Performance is nothing without consistency. Unlike traditional lamp technology the LED illumination in the HD93 provides consistent brightness and colour performance, so maintaining its out-of-the-box image quality throughout its lifetime and saving you from costly calibrations.
The lamp-less LED illumination engine that powers the HD93 does not require the inconvenience and cost of frequent lamp changes to maintain its optimal performance. It also doesn’t need lengthy warm-up and cool down cycles before and after every viewing due to its almost instant start up and shut down times.
Enormous Pure Engine Generation
• Ultra Detail — A unique image processing algorithms and a dedicated image detail processor gives the impression of extremely high image quality without the artifacts associated with moving pixel systems. It analyzes the difference of characteristics and scene of each frame, then creates and combines extra 36 new frames with original 24 frames into a new 60 frames / Sec dynamic images, to create a “124 Mega extreme Pixel” image.
• Pure Motion–The technology provides advanced motion control processing that eliminates motion blurring or image judder, even in high-speed action sequences and 3D modes.
• PureColor–This mode makes it possible for the projector to reproduce more detailed shades of color; to provide vivid, balanced color for vibrant, natural looking images.
On start-up the HD93 colour and white point and automatically calibrated to ensure the most accurate and consistent colour reproduction over its entire lifetime.
Color Management System (CMS)
Display accurate life-like colours to best match your viewing environment. This unique feature provides you with the flexibility to fine-tune the colour settings to the Rec. 709 standard for optimal precision.
Dynamic Black IV smoothly adjusts the lamp output automatically, based on the brightness information of each frame; to create a stunning contrast ratio. Bright scenes are crisp and clear, while dark scenes remain detailed with deep blacks which gives exceptional light and shade detail.
Real 2D to 3D Technology
2D to 3D technology is the process of transforming 2D (“flat”) film to 3D form; Real 2D to 3D technology is measuring the timeline of each film and dividing image to multiple layers, in order to define the image to real 3D image, and solve the distorted situation.
HDMI Link lets you to turn on and off two or more HDMI-CEC capable devices using a single remote control.
Full HD 1080p and Full 3D
1080p resolution gives you sharp and detailed images from HD content without downscaling or compression; perfect for watching movies, viewing photos and documents.
Optoma projectors can display true 3D content from almost any 3D source, including 3D Blu-ray players, 3D broadcasting and the latest generation games consoles. Support for 144Hz rapid refresh rate provides ultra-smooth flicker free images.
The high efficiency of the LED technology produces less heat so less cooling is required, resulting in near silent operation. Therefore, the your projector can be installed closer to walls or ceilings or even built into a small enclosure offering previously unexplored installation options.
The combination of Lens Shift and a wide 1.25x zoom range enables a wider range of projector placement possibilities. This remarkable combination makes it easier to position the projector in your viewing room and allows a wider range of screen size options.
Use the USB-Power to power an HDMI dongle, such as Google Chromecast or the Optoma WHD200 wireless HDMI device.
|Native Resolution||1080p 1920 x 1080|
|Brightness1 (Bright Mode)||1600 ANSI Lumens|
|Lamp Life2 Bright||20,000 (LED Life) (hrs)|
|Throw Ratio 3||1.22 – 1.52:1|
|Zoom Type||1.9x Manual|
|Lens Shift||Vertical: +/- 60, Horizontal: +/-10% (constraints apply see user manual for details)|
|I/O Connectors||2 x HDMI (1.4a 3D support), VGA (RGB/YPbPr), Component, Composite, 3D-Sync, 2 x 12V trigger, RS232, USB-A Power, USB service|
|Keystone Correction||±30° Vertical|
|Dimensions (W x D x H) (mm)||345 x 443 x 161.5mm (inc. feet)|
|Aspect Ratio||16:9 Native, 4:3 Compatible|
|Projection Screen Size||50” – 150”|
|Projection Distance||1m – 10m|
|Projection Lens||F/2.0~2.32; f=18.07~22.59mm, 1.25x Manual Zoom|
|Computer Compatibility||UXGA, SXGA, WXGA, HD, XGA, SVGA, VGA, Mac|
|Video Compatibility||NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4,43MHz SECAM B/D/G/K/K1/L, 4.25/4.4MHz 480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz), 1080p(50/60Hz)|
|3D Support||Full 3D – The 3D features of Optoma projectors can only be used with compatible 3D content. Typical applications include use with 3D educational or 3D design and modelling systems. 3D TV broadcast systems, (SKY in the UK), Blu-ray 3D™ and 3D games from the Sony® PS3 or Microsoft® Xbox 360 are now supported as part of the HDMI v1.4a specification.|
|3D Compatibility||Side-by-Side:1080i50 / 60, 720p50 / 60
Frame-pack: 1080p24, 720p50 / 60
Over-Under: 1080p24, 720p50 / 60
|Horizontal Scan Rate||15.375~91.146 KHz|
|Vertical Scan Rate||24~ 85 Hz (120Hz for 3D)|
|Displayable Colours||1073.4 Million|
|Noise Level (Eco mode)||23dB|
|Power Supply||Input: 110 – 220v Consumption: 245W Max. Standby: <0.5W|
|Power Consumption||245W Bright mode / 150W Film mode (< 0.5W Standby)|
|Lamp Type||LED 147W|
|Operating Conditions||5°C – 40°C, Max. Humidity 85%, Max. Altitude 3000m|
|Security||Security bar, Kensington lock|
|On Screen Display||22 Languages: English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish, Norwegian/Danish, Finnish, Greek, Traditional Chinese, Simplified Chinese, Japanese, Korean, Russian, Hungarian, Czech, Arabic, Thai, Turkish|
|Standard Accessories||AC power cord, remote control, 2x AA batteries, quick start card, CD user manual|
|Optional Accessories||Wireless 3D system, Wireless 3D glasses, wireless, ceiling mount|